2,54 9 x 2,54 (=22,86) 0,8 0,1 0,8 0,1 4,8 0,2 / voreilend s = standard e s l steckl?nge / mating length e = early mate, late break l = late mate, early break / nacheilend 2,54 3 +0,1 3,95 2x2,54=5,08 2,54 2 x 2,54 (=5,08) 2,54 9 x 2,54 (=22,86) index date - 03.07.2009 prior notice. contact one of the erni companies stvc/3 male connector c/3 20 pressfit messerleiste c/3 20 ee 354330 2:1 information: tolerances scale all dimensions in mm class www.erni.com subject to modification without a3 designation before using. drawing will not be updated. all rights reserved. only for information. to ensure that this is the latest version of this drawing, please copyright by erni gmbh proprietary notice pursuant to iso 16016 to be observed. rc 2 mating length steckl?nge xxxxxxx class anforderungsstufe erni datum date 31,7 10,2 38,2 -0,2 -0,1 33,02 2,5 +0,1 12,7 6,4 9 isolierwerkstoff / housing material : pbt gf 30 bauart 4 / t marking see drawing 294905 missing information and dimensions pe r iec 60 603-2 / din en 60 603-2 ype 4 anforderungsstufe 2 = 400 steckzyklen / performance class 2 = 400 mating cycles fehlende ma?e und angaben nach iec 60 603-2 / din en 60 603-2 schichtaufbau im metallisierten loch siehe zeichnung 164062 / nr.6 / compliant pressfit zone elastische einpresszone berduckung siehe zeichnung 294905 1) 1,0 +0,09 -0,06 durchmesser des metallisierten loches 1,0 +0,09 -0,06 diameter of finished plated-through hole a b c (=5,08) 6 0,1 -0,4 2 x 2,54 3 0,6 a1 c10 c1 a10 11,1 max. 2,5 +0,1 +0,2 29,3 -0,2 8,7 1 -0,1 all holes 10 alle l?cher / b 2 c leiterplatten- lochbild / pcb drillhole pattern a 1 3 4 5 6 7 8 9 0,05 0,1 5,3 ) 1 2,8 +0,1 33,02 4 53 contact layout c b a s s ss s s s s s ss s s s s s s s s s s s s ss s s s s s 2 10 9 8 7 6 bestckungsplan / 1
|